June 23, 2024

The paint on a surface starts peeling when there is moisture that accumulates between the layer of the paint and the surface below it. As the paint peels, it becomes easier for the moisture to get into the underlying area, and this results in more peeling. This starts a never-ending cycle, and to stop this, you should keep the surface away from any moisture. Follow these steps to prevent blistering paint:

Keep The Interiors Dry And Moisture Free

Be mindful of the relative humidity inside the house. Try using kitchen fans or bath fans to keep out the moisture. An ideal relative humidity is below 55% in cold months, but if it is too high, then use fans more frequently.

Repair The Walls

Check your walls for cracks and holes, and repair them. You can use a patching compound for this. Apply the compound with a putty knife and smooth it into a thin layer, to fill in these areas along the wall. Allow the patching compound to dry completely before you repaint the walls.

Rough Up The Old Paint

When you paint first, rough up the old paint on the surface with sandpaper. Small imperfections, indentations or cracks can be mended with this technique.

Use A Good Quality Primer

A primer is used to bind the new layer of paint with the old layer of paint. A primer creates a base so you don’t need several coats to cover the old cover. This is because the primer is smooth, and the old layer of paint will not stick to it.

Remove Any Peeling Paint

To stop paint from peeling, it is essential to remove any peeling paint so that moisture cannot work its way under the surface. Use a paint scraper to peel the paint. Push the scraper back and forth to loosen the paint, until you meet strong resistance.

Reseal The Area

By using paint and primer, restore your wall surfaces to look good as new. This will prevent the peeling and damages to your wall in the future. After the primer dries completely, apply a fresh coat of paint over the surface.

A little care and patience is what is required to stop walls from peeling away. But, practise caution when removing, scraping or sanding painted surfaces. Wear a respirator to avoid exposure to paint, or cover your face with a cloth, and you’ll be good to go.